3M 16000 PPS Lids & Liners Standard Size 650ml 200 Micron x 50 Pack Box

3M 16000 PPS Lids & Liners Standard Size 650ml 200 Micron x 50 Pack Box An innovative system that increases quality, reduces solvent usages and increases paint shop productivity. With PPS your spray gun functions at any angle, many painters mix more paint than they need to reduce the chance of starving the gun. PPS allows painters to spray at any angle without starving the paint gun. 200u filters, ideal for solvent based paints. Reduce cycle times with fast and easy clean up using 3M PPS; often more than 50% time savings. Mix, filter and spray out of a disposable lid (with pre-welded filter) and liner. Ability to spray at all angles, 90 degree to the work surface; even upside down if needed. This provides consistent material transfer which reduces overspray and material consumption. Consistent Material transfer, increase the probability of colour Match, improve quality. Sealing plugs allow for temporary sealing and protection of non-catalyzed paint materials. PPS is a comprehensive painting system from 3M, which delivers cleaner jobs, reduces solvent usage and gun cleaning time, and can enhance operator efficiency by up to 15%. Specially designed adapters enable painters to utilize the PPS system with almost any spray gun. PPS replaces conventional mixing cups and filters, significantly cutting down the amount of solvent needed for gun cleaning. The liner, lid, and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It\’s possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can achieve a 70% reduction in cleaning solvent usage – resulting in reduced operator exposure to solvents and lower VOC emissions. Since PPS uses the same cup for mixing and spraying, there\’s less risk of outside contamination and less time spent on mixing and cleaning. KIT CONTAINS 50 Lids (200 Micron Filters) 50 Liners. 20 Sealing Plugs. Graduated measurement to 600 mL (with mix ratio film insert). Maximum capacity of 750 mL when filled within 1/8\” of rim. For use with 3M part number 16001.