AUTOOL SDT106 Auto EVAP Leakage Smoke Test Machine

AUTOOL SDT106Product OverviewThe AUTOOL SDT106 smoke test machine is an entry-level automotive piping leak detection tool with a built-in air pump. It helps technicians and DIY users find low-pressure leaks in automotive pipe systems, including intake, exhaust, EVAP, car sealing, fuel tank, and various pipe fitting checks. The hook design makes it easier to hang the unit during work, and the detector runs from a DC12V battery.Built-In Air Pump DC12V Battery 10-15ml Test Oil <12psi Output<5L/minOutput Flow50WRated Power210×135×110mmMain Unit3 YearsWarranty Click to enlargeBefore You Order And UseBefore You Order And UseBefore starting a leak test, confirm the DC12V power requirement, testing oil rule, operating time limit, overheat protection, and hot-surface warning.DC12V Battery RequiredThe SDT106 smoke detector must be connected to a DC12V battery before operation. Do not use an incompatible power source.Testing Oil Not IncludedTesting oil is not included due to logistics restrictions. Buy liquid paraffin or baby oil locally for use as the testing liquid.Add 10-15ml OnlyFor first use, fill 10-15ml testing oil. Do not exceed this range, because overfilling leaves less space for smoke generation.Refill Only When Smoke Is ThinOnly add fresh oil when the smoke becomes thin. Limit each fill to no more than 15ml.Drain Old Oil FirstBefore filling fresh oil, pour out the remaining oil in the detector and replace detector oil regularly.8-Minute Use LimitDo not run the detector continuously for more than 8 minutes. Let the unit rest between test cycles.Safety ReminderDuring leak detection, keep smoke away from smoke-sensitive parts.The round metal section of the detector may become hot during operation. Avoid direct contact to prevent burns.If the internal temperature exceeds 75°C, the intelligent protection device shuts off the power automatically. Wait until the unit cools before operating it again.The unit can work in low-temperature environments down to -20°C under proper conditions.Do not refill oil while the detector is running.Key FeaturesKey FeaturesSDT106 focuses on simple low-pressure automotive leak detection with a built-in pump, quick smoke output, compact hanging design, wide 12V vehicle coverage, and built-in protection.Built-In Air PumpNo extra air pump is required. The built-in air pump helps reduce setup time and lowers the cost of entry for basic automotive smoke leak testing.Quick Smoke OutputThe detector starts producing smoke quickly after power-on. Allow the test pipe to fill with smoke before checking leak points visually.Lightweight Hook DesignThe compact body and hook design make it easier to hang the unit under the engine cover during inspection, transport it, and store it after use.Low-Pressure Leak DetectionSuitable for low-pressure checks on EVAP, intake, exhaust, fuel tank, car sealing, and common vehicle pipe fitting systems.Wide 12V Vehicle CoverageCan be used for leak checks on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks, and speedboats that match the DC12V use requirement.Overheat And Low-Temperature ProtectionThe protection device turns off power when the unit exceeds 75°C, and the machine supports low-temperature operation down to -20°C under proper conditions. Click to enlarge Click to enlarge Click to enlarge Click to enlarge Click to enlargeSpecificationsSDT106 Product SpecificationsSDT106 uses low oxygen combustion smoke generation, a built-in air pump, DC12V battery power, and 10-15ml testing oil for low-pressure automotive piping leak detection.Core SpecificationsProductAUTOOL SDT106 Smoke Leak DetectorWorking TheoryLow oxygen combustionPower SupplyDC12V batteryAir Pressure OutputBuilt-in air pumpRated Output Pressure<12psiRated Output Flow<5L/minRated Power50WTest Oil Filling Volume10-15mlProtectionStops working above 75°CLow Temperature OperationWorks down to -20°C under proper conditionsSize And PackageMain Unit Dimensions210 × 135 × 110mmPackage Dimensions275 × 220 × 255mmPackage Weight3.55kgTesting LiquidLiquid paraffin or baby oil; testing oil is not included Click to enlarge Core SpecificationsProductAUTOOL SDT106 Smoke Leak DetectorWorking TheoryLow oxygen combustionPower SupplyDC12V batteryAir Pressure OutputBuilt-in air pumpRated Output Pressure<12psiRated Output Flow<5L/minRated Power50WTest Oil Filling Volume10-15mlProtectionStops working above 75°CLow Temperature OperationWorks down to -20°C under proper conditions Size And PackageMain Unit Dimensions210 × 135 × 110mmPackage Dimensions275 × 220 × 255mmPackage Weight3.55kgTesting LiquidLiquid paraffin or baby oil; testing oil is not included How To UseHow To UseUse SDT106 with a DC12V battery and 10-15ml liquid paraffin or baby oil. After the detector starts producing smoke, allow the pipe to fill, then check the leak points visually.Add Test OilFor first use, fill 10-15ml baby oil or liquid paraffin into the detector. Do not overfill.Connect The Test PipeOpen the engine cover, hang the smoke test machine on the cover if needed, then disconnect the pipe that needs to be connected to the detector.Connect DC12V PowerConnect the smoke test machine to a DC12V battery, then turn on the power switch so the detector starts working.Locate The LeakAfter smoke fills the pipe, check the leak points visually. Use a headlamp if extra visibility is needed. Click to enlargeUse NotesTesting oil is not included due to logistics restrictions.Use liquid paraffin or baby oil as the testing liquid.Only refill when smoke becomes thin.Drain remaining oil before adding fresh oil.Do not operate continuously for more than 8 minutes.Wait for the unit to cool down if the overheat protection is triggered. Click to enlargeWhat Is In The BoxWhat Is In The BoxThe packing list image shows the SDT106 main unit, package box, and included accessories. The oil bottle is included as an empty bottle; testing oil is not included due to logistics restrictions.Main UnitAUTOOL SDT106 smoke leak detectorPower CableDC12V battery clamp cable shown in the package imageSmoke HoseSmoke output hose shown in the package imageAdaptersCone adapter, airbag adapter, rubber plugs, and accessories shown in the package imageOil BottleEmpty test oil bottle included; testing oil is not includedDocumentationUser manual and SDT106 retail boxProduct ComparisonProduct ComparisonCompare SDT106 with other AUTOOL smoke leak detector models before choosing the right air source, pressure, flow, pressure gauge, flow meter, oil drain valve, and operating mode.SDT106 FocusEntry built-in pump smoke leak detector with DC12V power, 10-15ml oil filling volume, <12psi output pressure, <5L/min output flow, smoke mode, and 50W rated power.Entry EVAP ModelsSDT103 is an EVAP-focused model with an external air source. SDT106 adds a built-in air pump for simpler setup.When To UpgradeChoose SDT203 if you need a pressure gauge and flow adjustment knob. Choose SDT205 or SDT205S if you need both air mode and smoke mode.Higher-End OptionsSDT206 uses a built-in dual air pump. SDT208 supports high pressure mode and low pressure mode for more demanding tests.Decision CheckBefore ordering, compare air source type, rated pressure, output flow, mode output, pressure gauge, flow meter window, flow adjustment knob, oil drain valve, and oil level gauge. Click to enlargeRelated ProductsRelated ProductsCompare related AUTOOL smoke leak detector models before choosing the right EVAP support, built-in pump setup, pressure range, pressure gauge, flow meter, and workshop function.Select options This product has multiple variants. The options may be chosen on the product page Add to wishlist Add to compare Quick view iconQuick view Smoke Leak DetectorSmoke Machine Leak Detector For leak test-AUTOOL SDT50Rated 0 out of 5(0) From US$85.00 Select options This product has multiple variants. The options may be chosen on the product page Select options This product has multiple variants. The options may be chosen on the product page Add to wishlist Add to compare Quick view iconQuick view Smoke Leak DetectorAuto Smoke Leak Detector For EVAP System-AUTOOL SDT101Rated 0 out of 5(0) From US$80.00 Select options This product has multiple variants. The options may be chosen on the product page Select options This product has multiple variants. The options may be chosen on the product page Add to wishlist Add to compare Quick view iconQuick view Smoke Leak DetectorAutomotive Smoke Tester for EVAP System 12V- AUTOOL SDT103Rated 0 out of 5(0) From US$90.00 Select options This product has multiple variants. The options may be chosen on the product page Select options This product has multiple variants. The options may be chosen on the product page Add to wishlist Add to compare Quick view iconQuick view Smoke Leak DetectorAUTOOL SDT106 Auto EVAP Leakage Smoke Test MachineRated 0 out of 5(0) From US$129.00 Select options This product has multiple variants. The options may be chosen on the product page Select options This product has multiple variants. The options may be chosen on the product page Add to wishlist Add to compare Quick view iconQuick view Smoke Leak DetectorAUTOOL SDT203 EVAP Smoke Machine Vacuum Smoke TesterRated 0 out of 5(0) From US$159.00 Select options This product has multiple variants. The options may be chosen on the product page Select options This product has multiple variants. The options may be chosen on the product page Add to wishlist Add to compare Quick view iconQuick view Smoke Leak DetectorAUTOOL SDT205 Automotive Smoke Machine Leak DetectorRated 0 out of 5(0) From US$199.00 Select options This product has multiple variants. The options may be chosen on the product page Select options This product has multiple variants. The options may be chosen on the product page Add to wishlist Add to compare Quick view iconQuick view Smoke Leak DetectorAUTOOL SDT205S Smoke Leak DetectorRated 0 out of 5(0) From US$249.00 Select options This product has multiple variants. The options may be chosen on the product page Select options This product has multiple variants. The options may be chosen on the product page Add to wishlist Add to compare Quick view iconQuick view Smoke Leak DetectorAUTOOL SDT206 Smoke Machine For Vacuum LeaksRated 0 out of 5(0) From US$299.00 Select options This product has multiple variants. The options may be chosen on the product page Select options This product has multiple variants. The options may be chosen on the product page Add to wishlist Add to compare Quick view iconQuick view Smoke Leak DetectorAUTOOL SDT208 Smoke for Leak DetectionRated 0 out of 5(0) From US$429.00 Select options This product has multiple variants. The options may be chosen on the product page Manual And DownloadsManual And DownloadsDownload the SDT106 user manual for setup, DC12V power connection, testing oil, operation, accessories, and safe-use instructions. Click to enlargeAUTOOL SDT106 User ManualOpen the PDF manual for SDT106 operation, setup, and safety guidance. Download ManualNeed Setup Confirmation?Contact AUTOOL Store before ordering if you need to confirm 12V battery setup, testing oil amount, smoke output behavior, package contents, model differences, or accessory support.Email[email protected] WhatsApp 86 189 2647 7404Questions And AnswersThese answers cover testing oil, oil amount, 12V power, operating time, supported systems, package contents, model differences, protection behavior, and warranty support. What Testing Oil Should I Use For SDT106? Use liquid paraffin or baby oil as the testing liquid. Testing oil is not included due to logistics restrictions, so you need to buy it locally before using the smoke tester. How Much Testing Oil Should I Add? For first use, add 10-15ml testing oil. Do not exceed this range. Only refill when the smoke becomes thin, limit each fill to no more than 15ml, and pour out the remaining oil before adding fresh oil. Does SDT106 Need A 12V Battery? Yes. The AUTOOL SDT106 smoke leak detector requires a DC12V battery connection to operate. Confirm the power supply before starting a test. How Long Can SDT106 Run Continuously? Do not run the detector for more than 8 minutes continuously. Let the unit rest between uses to protect the machine and maintain stable operation. What Happens If The Unit Gets Too Hot? If the detector exceeds the working limit, such as over 75°C, the intelligent protection system automatically turns off the power. Wait for the detector to cool before operating it again. What Systems Can SDT106 Test? SDT106 is suitable for low-pressure leak checks on automotive pipe systems, including EVAP, intake, exhaust, fuel tank, car sealing, and various pipe fittings. Keep smoke away from smoke-sensitive parts during detection. What Vehicles Can Use SDT106? SDT106 can be used for leak checks on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks, and speedboats that match the DC12V use requirement. It is intended for low-pressure vehicle piping leak detection. Can SDT106 Be Used For High-Pressure System Testing? SDT106 is designed for low-pressure smoke leak detection, with rated output pressure below 12psi. Do not use it as a high-pressure pressure-testing tool. What Accessories Are Included? Refer to the Packing List image for the final package contents. The package shows the SDT106 main unit, DC12V battery clamp cable, smoke hose, cone adapter, airbag adapter, rubber plugs, other accessories shown in the image, an empty oil bottle, user manual, and retail box. Testing oil is not included. What Is The Difference Between SDT106 And Other AUTOOL Smoke Detectors? SDT106 is an entry built-in-pump model with smoke mode, DC12V power, <12psi output pressure, and <5L/min output flow. SDT203 adds a pressure gauge and flow adjustment. SDT205 and SDT205S support air mode and smoke mode. SDT206 uses a built-in dual air pump. SDT208 supports high pressure and low pressure modes. What Should I Do If The Smoke Becomes Thin? Stop operation first. Drain the remaining oil in the detector, then add fresh liquid paraffin or baby oil. Do not add more than 15ml at one time. How Long Is The Warranty? AUTOOL provides 3-year warranty support for eligible damage caused by non-human factors. Contact support for setup, accessories, troubleshooting, or warranty confirmation.Warranty And ContactWarranty And ContactFor SDT106 setup, 12V power, testing oil, smoke output, packing list confirmation, accessory support, model comparison, or 3-year warranty service, contact AUTOOL Store directly.Pre-Sales And Product SupportUse support if you need help confirming SDT106 oil amount, refill rules, DC12V battery setup, package contents, compatible low-pressure leak checks, or the right SDT model for your workshop.3-year warranty support for eligible non-human damage casesTesting oil and refill amount confirmationDC12V power setup guidancePacking List and accessory confirmationNo-smoke, thin-smoke, or overheat protection troubleshootingSDT103 / SDT106 / SDT203 / SDT205 / SDT205S / SDT206 / SDT208 model selectionEmail Support[email protected] WhatsApp Support 86 189 2647 7404